ULTEM™ resin 1000EF by SABIC is an unreinforced, amorphous, flame retardant polyetherimide (PEI) resin. It is suitable for processing by additive manufacturing, extrusion blow molding-, foam-, film... view more

ULTEM™ resin MD130 (Americas) by SABIC is an unreinforced, transparent, standard flow polyetherimide (PEI) resin. Shows good mechanical properties in a broad temperature range. Offers high heat... view more

ULTEM™ resin MD130 (Asia) by SABIC is a standard-flow, unreinforced, transparent polyetherimide (PEI) resin. Shows good mechanical properties in a broad temperature range. Offers high heat... view more

ULTEM™ resin MD130 (Europe) by SABIC is a standard-flow, unreinforced, transparent polyetherimide (PEI) resin. Offers high heat resistance and high glass transition temperature (Tg) up to 217°C... view more

STYRON A-TECH® 1115 is a high impact polystyrene (HIPS) grade. Provides better color consistency, the ability to down-gauge and improved wall thickness distribution. Offers excellent dimensional... view more

STYRON A-TECH® 1170 is a high impact polystyrene (HIPS) grade. Provides better color consistency, the ability to down-gauge and improved wall thickness distribution. Offers gloss, stiffness, flow... view more

STYRON A-TECH® 1290 by AmSty is a high impact polystyrene (HIPS) grade. Offers gloss, stiffness, flow, processing ability, cost and exhibits good impact and ESCR resistance. Provides better color... view more

STYRON® 484 by AmSty is a high impact polystyrene (HIPS) grade. Offers toughness, excellent dimensional stability, gloss, good stiffness, flow, cost, processing ability and exhibits heat resistance... view more

Ashlene® 831 is a FDA approved, amorphous, medium viscosity 45-50 RV polyamide 6 (Nylon 6) grade with good puncture resistance. Is suitable for processing by extrusion. Applications include wire... view more

Ashlene® 835 is a FDA approved, medium viscosity (70 R.V.) polyamide 6 (Nylon 6) grade. Is suitable for processing by extrusion. Used in critical auto applications and in laminating, applications... view more

Ashlene® 851 is a FDA approved, high viscosity (200 R.V.) polyamide 6 (Nylon 6) grade with high puncture resistance. Is suitable for processing by extrusion. Recommended for tubing, rods, shapes... view more

Ashlene® 852 is a FDA approved, very high viscosity (800 R.V.) polyamide 6 (Nylon 6) grade with very high environmental stress crack resistance. Is suitable for processing by extrusion. Recommended... view more

Ashlene® A835 is a medium viscosity (75 R.V.), high strength polyamide 6 (Nylon 6) grade. Is suitable for processing by extrusion. Applications include sewing thread, fishing net etc. Used in... view more

H 503 by Braskem is a low melt flow polypropylene additivated homopolymer grade. It exhibits excellent processability, good melt stability, good stiffness & impact strength balance and low odor and... view more

HP 550R by Braskem is a translucent/ white, high fluidity polypropylene homopolymer grade. Does not contain the substance Bisphenol A (BPA, CAS # No. 80-05-7) in its composition. Insoluble in water... view more

LL4801N by Braskem is a translucent/ white linear low density polyethylene (LLDPE) grade. Contains processing aid and antioxidant additives. Does not contain the substance Bisphenol A (BPA, CAS #... view more

SANTOPRENE™ 8271-55 by Celanese is a soft, neutral, non-hygroscopic, specialty and colorable polyolefin-based thermoplastic vulcanizate (TPV) grade. It is recyclable within the manufacturing stream... view more

VL0003, Sheet by Daelim Industrial is a metallocene polyethylene (mPE) plastomer grade. It contains antioxidant. Shows excellent tensile strength, excellent impact strength, lower density than EVA... view more

Delrin® FG150 NC010 by DuPont is a high-viscosity acetal homopolymer. It is naturally resilient and self-lubricating. It possesses excellent thermal stability, low die deposit and enhanced... view more

Ensoft-T® V-900 Series grades are recyclable, soft, unsaturated styrene-butadiene-styrene (SBS) block copolymer-based high performance compounds. Exhibits high melt flow, excellent elasticity... view more