Arnitel® CM622 by Envalior is a high-performance, heat stabilized, thermoplastic co-polyester (TPC) elastomer. It is a lighter, smarter, greener alternative to conventional rubbers thus, reducing... view more

EcoPaXX® Q-DWX6 by Envalior is a bio-based, long-chain aliphatic polyamide 4-10 (PA 4-10) grade reinforced with 30% glass fiber. It possesses excellent surface properties and very high melting point. It... view more

EcoPaXX® Q-HG6 by Envalior is a heat-stabilized, 30% glass-fiber-reinforced, long aliphatic polyamide (PA410) based on castor oil. It is processed by injection molding. It is particularly suitable for... view more

ForTii® WX11-FC by Envalior is a 30% glass-reinforced, drinking water, polyphthalamide grade. This food contact quality is suitable for processing by injection molding. It shows excellent hydrolysis... view more

Stanyl® TW341 by Envalior is a high-performance, heat-stabilized and lubricated polyamide 4-6 (PA 4-6) grade. It is suitable for processing by injection molding. It possesses high flow, cycle-time... view more

DOW™ LLDPE DNDA-7340 NT 7 is a linear low density polyethylene (LLDPE) grade. Exhibits high melt strength, excellent low temperature toughness, outstanding environmental stress crack resistance... view more

FLEXOMER™ DFDA-1137 NT 7 is a high molecular weight, relatively narrow molecular weight distributed ethylene very low density polyethylene (VLDPE) copolymer. Contains processing aid additive... view more

NORDEL™ IP 4520 by Dow is an ethylene propylene diene monomer (EPDM) grade with medium molecular weight distribution. It offers low viscosity and low crystallinity allows for good processability... view more

NORDEL™ IP 4570 by Dow Chemical is an ethylene propylene diene monomer (EPDM) grade with medium molecular weight distribution. Contains 50% of mass ethylene, 4.9% of mass 5-ethylidenenorbornene... view more

NORDEL™ IP 4640 by Dow is a semi-amorphous, ethylene propylene diene monomer (EPDM) grade. It possesses medium molecular weight distribution, medium viscosity and low mass crystallinity. It offers... view more

VESTAMID® L2123 by Evonik is a high viscosity, electrically isolating, semi-crystalline, unfilled, plasticized, polyamide 12 compound. It is processed by injection molding and profile & tube... view more

VESTAMID® LX9008 black 9.7504 by Evonik is an unfilled, electrically isolating, heat stabilized, high viscosity, plasticizer-free, polyamide 12 compound. It possesses extraordinary long-term heat... view more

VESTAMID® LX9013 black 9.7507 by Evonik is a high viscosity, electrically isolating, unfilled, plasticized, heat stabilized, polyamide 12 compound with extraordinary long-term heat resistance under... view more

Vistalon™ 5601 by ExxonMobil Chemical is ethylene propylene diene monomer (EPDM) terpolymer ruber produced using EXXPOL™ Technology for precise control of molecular composition and architecture... view more

TORZEN® Marathon G3000XHL BK20 PA66 Resin is a heat stabilized polyamide 66 (PA66) grade reinforced with 30 % glass fibers. Exhibits high flowability and similar shrinkage compared to conventional... view more

CHLOROPRENE™ GN by Resonac (formerly Showa Denko) is a sulfur modified, general purpose, high quality polychloroprene rubber. It is a gas impermeable, dry resin having medium crystallization rate. Exhibits good electrical... view more

CHLOROPRENE™ GW by Resonac (formerly Showa Denko) is a general purpose, sulfur modified polychloroprene rubber. It is a high quality, gas impermeable, dry grade. Exhibits slow crystallization rate and good electrical... view more