Desmopan® 3491A by Covestro is an ester-based thermoplastic polyurethane (TPU) block copolymer grade with high mechanical strength and melt stability. It is suitable for processing by injection molding... view more

Makrolon® WB1239 by Covestro is a high viscosity, branched polycarbonate (PC) grade. It is processed by injection stretch blow molding and extrusion blow molding. Makrolon® WB1239 is used in food contact... view more

Texin® RxS285 by Covestro is an aromatic polyester-based thermoplastic polyurethane (TPU). It is used in medical applications include dental ligature, tubing and luers. It exhibits biocompatibility... view more

Texin® RxS292 by Covestro is a biocompatible, aromatic polyester-based thermoplastic polyurethane (TPU) for medical applications. It offers low gel content, good clarity and abrasion resistance. It is... view more

Texin® RxT50D by Covestro is an aromatic polyether-based, hydrolytically stable thermoplastic polyurethane. It exhibits abrasion resistance, impact strength, toughness, biocompatibility and... view more

Akulon® Fuel Lock FL-LP by Envalior is a high-performance, resilient polyamide 6 (PA 6) grade. It is a UV-stabilized grade and offers low fuel permeation benefits. It can be processed by blow molding. Exhibits... view more

Akulon® K240-HPG3 by Envalior is a heat-stabilized polyamide 6 grade reinforced with 15% glass. Used in automotive engine applications like clean-, cold- and hot-charged air inlet ducts. Offers good... view more

Arnitel® HT7719 by Envalior is a non-reinforced & non flame retarded, high performance, heat resistant, thermoplastic copolyester. It shows chemical resistance. It is a lighter, smarter, greener... view more

Arnitel® HT8027 by Envalior is a heat resistant, high performance, thermoplastic copolyester (COPE) grade. It is a lighter, smarter, greener alternative to conventional rubbers thus, reducing... view more

LEXAN™ VISUALFX™ Resin FXD153 (Europe) by SABIC is a PFAS-free, unreinforced polycarbonate (PC) grade for diffusion effect. It offers aesthetics and visual effects. It is suitable for processing by extrusion blow molding... view more

ULTEM™ resin 1000 by SABIC is amorphous, transparent, flame-retarded polyetherimide (PEI) grade. It is metallizable and transparent to microwave radiation & near IR. Provides high stiffness... view more

ULTEM™ resin 1000E by SABIC is an unreinforced, amorphous, halogen-free flame retardant polyetherimide (PEI) resin. It is suitable for processing by additive manufacturing, extrusion blow molding... view more

ULTEM™ resin 1000EF by SABIC is an unreinforced, amorphous, flame retardant polyetherimide (PEI) resin. It is suitable for processing by additive manufacturing, extrusion blow molding-, foam-, film... view more

ULTEM™ resin 1000F by SABIC is an unreinforced, flame retardant, amorphous polyetherimide (PEI) resin. It exhibits internal mold release, good chemical-, radiation (gamma, x-ray), UV-C-, and high... view more