SURLYN™ 1601 lonomer by Dow is a reliable, cost-effective ethylene acid copolymer. It exhibits outstanding clarity, high stiffness, abrasion- & flex crack resistance, and ability to downgauge. It is a... view more

SURLYN™ 1652 Ionomer by Dow is a zinc ionomer grade. It exhibits stiffness, foil adhesion, outstanding toughness at low temperature and low seal initiation temperature. It provides high hot tack... view more

SURLYN™ 1652SR Ionomer by Dow is a cost-effective zinc ionomer. It offers outstanding clarity, toughness, abrasion-, high flex crack resistance and ability to downgauge. It contains slip and chill roll... view more

Novamid® 2030FC by Envalior is a lubricated, melt stable, high viscosity, polyamide 6/66 grade. It is suitable for processing by cast film, air-cooled blown film, and CoPA for film extrusion. Possesses... view more

HiDura™ D1X NT by Ascend Performance Materials is a general purpose, medium viscosity, polyamide 6-12 (PA 6-12) grade. It exhibits low moisture absorption, good chemical- & abrasion resistance, dimensional stability and... view more

HiDura™ D1XA NT by Ascend Performance Materials is a medium viscosity polyamide 6-12 (PA 6-12) grade with good chemical- and abrasion resistance. It exhibits low moisture absorption, good dimensional stability and high... view more

HiDura™ D2X NT by Ascend Performance Materials is a medium-high viscosity polyamide 6-12 (PA 6-12) grade with good chemical and abrasion resistance. It exhibits low moisture absorption, good dimensional stability and high... view more

HiDura™ D3X NT by Ascend Performance Materials is a ductile, high viscosity polyamide 6-12 (PA 6-12) grade with good chemical and abrasion resistance. It exhibits low moisture absorption, good dimensional stability and... view more

HiDura™ S1X NT by Ascend Performance Materials is a low-medium viscosity, general purpose polyamide 6-10 (PA 6-10) grade with 62% bio-based content. It exhibits good dimensional stability, chemical and abrasion... view more

Ultramid® A34 01 by BASF is a polyamide 66 (PA66) grade with a medium viscosity. It has good elastomeric characteristics, dimensional stability, high creep strength, and great sliding friction... view more

NYCAST® 12 by Cast Nylons is a water-insoluble, impact modified PA (polyamide) 12 grade. Exhibits low moisture absorption, low deformation, superior fatigue resistance and low creep factor. Offers... view more

Hytrel® 60LW by Celanese is a lubricated, thermoplastic polyester elastomer (TPE) grade available in the form of pellets. Exhibits good mold release, good abrasion and wear resistance. Hytrel® 60LW can... view more

Riteflex® 830 by Celanese is a high melt strength thermoplastic copolyester elastomer. Exhibits excellent water barrier, good abrasion resistance, excellent bleach resistance, good heat resistance... view more

Zytel® 42A NC010 by Celanese is a high viscosity polyamide 66 grade and reasonably priced product. It has strong mechanical qualities, a great stiffness-toughness balance, good high temperature... view more

Zytel® 45HSB NC010 by Celanese is a high viscosity, heat-stabilized polyamide 66 grade. Exhibits high mechanical strength, excellent balance of stiffness & toughness, good high temperature performance... view more

Zytel® E41HSB NC010 by Celanese is an unreinforced, high viscosity, heat stabilized polyamide 66 resin. It is a cost-effective, high-performance nylon resin. Exhibits high mechanical strength, balanced... view more