EP31ND by Master Bond is a non-flow viscosity, two part epoxy (EP) system with exceptional bonding strength properties and non-drip application. It is used mostly for bonding, but is also... view more

ULTEM™ resin 1000 by SABIC is amorphous, transparent, flame-retarded polyetherimide (PEI) grade. It is metallizable and transparent to microwave radiation & near IR. Provides high stiffness... view more

ULTEM™ resin 1010AR by SABIC is an unreinforced, general purpose, amorphous, flame retardant, metallizable polyetherimide (PEI) resin. It offers easy flow, internal mold release, good chemical... view more

ULTEM™ resin 1010M by SABIC is an unreinforced, general purpose, metallizable, amorphous, flame retardant polyetherimide (PEI) resin. It is IR transparent and contains a reduced level of internal... view more

ULTEM™ resin 2310R by SABIC is an amorphous, flame retardant, general purpose, polyetherimide (PEI) grade reinforced with 30% glass fiber. It exhibits internal mold release, good flow, low creep... view more

PA 2241 FR by 3T Additive Manufacturing is a halogen-based flame retardant containing polyamide 12 grade used to produce parts made by plastic Additive Manufacturing (AM). Is suitable for processing... view more

Rilsan® PA 11 Invent Black by Arkema is a black colored, durable thermoplastic polyamide 11 (PA 11) fine powder. It is a high performance polyamide 100% sourced from a renewable raw material. It... view more

PREPERM™ PEEK1000 by Avient (Formerly PolyOne) is a high temperature polyetheretherketone (PEEK) grade. Offers outstanding thermal stability, excellent mechanical properties and chemical resistance... view more

PREPERM™ PEEK1200 by Avient (Formerly PolyOne) is a thermally stabilized, high temperature polyetheretherketone (PEEK) grade. Exhibits low dissipation factor, excellent mechanical properties... view more

PREPERM™ PEEK700 by Avient (Formerly PolyOne) is a high temperature polyetheretherketone (PEEK) grade. Exhibits low dissipation factor, outstanding thermal stability, excellent mechanical... view more

PREPERM™ PEEK900 by Avient (Formerly PolyOne) is a high temperature polyetheretherketone (PEEK) with low dissipation factor. Exhibits outstanding thermal stability, excellent mechanical properties... view more

BRASKEM FL900PP-CF by Braskem is a 100% recycled carbon fiber reinforced polypropylene (PP) filament for 3D printing. It offers low warpage, superior mechanical and thermal properties. It shows high... view more

PVdF is an anti-ultraviolet and anti-radiation polyvinylidene fluoride crystal polymer by ChenGuang Research Institute of Chemical Industry. Exhibits low melting point, poor heat conductivity, high... view more

ESTANE® 3D TPU F98A-030CR HC by Lubrizol is a 3D printing, thermoplastic polyurethane (TPU). This grade exhibits excellent mechanical properties, low warpage and shrinkage. ESTANE® 3D TPU F98A-030CR HC possesses high strength, high... view more

Lytex® 9063 BK-E by Quantum Composites is a high performance, epoxy-based engineered structural composite, reinforced with 63% glass fiber. Offers excellent mechanical properties, retention of... view more

ALCUDIA 47100 is a HDPE hexene copolymer of high molecular weight. Possesses excellent mechanical properties, stress cracking resistance and good resistance to internal pressure. Possesses excellent... view more

CYCOM® 381 by Syensqo is a tough epoxy prepreg resin. It has high 82°C wet mechanical properties, low moisture absorption, and excellent fatigue characteristics. Low processing temperatures, good... view more

KetaSpire® KT-880 CF40 by Syensqo is a high flow, low viscosity, radiotranslucent, polyether ether ketone (PEEK) grade. It is reinforced with 40% chopped carbon fiber which provides high strength and... view more