Arnitel® CM622 by Envalior is a high-performance, heat stabilized, thermoplastic co-polyester (TPC) elastomer. It is a lighter, smarter, greener alternative to conventional rubbers thus, reducing... view more

ForTii® WX11-FC by Envalior is a 30% glass-reinforced, drinking water, polyphthalamide grade. This food contact quality is suitable for processing by injection molding. It shows excellent hydrolysis... view more

Stanyl® TW341 by Envalior is a high-performance, heat-stabilized and lubricated polyamide 4-6 (PA 4-6) grade. It is suitable for processing by injection molding. It possesses high flow, cycle-time... view more

3M™ Dyneon™ Fluoroplastic THV 500GX4Z is a melt-processable fluorothermoplastic containing tetrafluoroethylene, hexafluoropropylene and vinylidene fluoride. Is suitable for processing by extrusion... view more

3M™ Dyneon™ Fluoroplastic THV 500GZ by 3M-Dyneon is a melt-processable fluorothermoplastic containing tetrafluoroethylene, hexafluoropropylene and vinylidene fluoride. It shows good chemical... view more

3M™ Dyneon™ Fluoroplastic THV 505ESDZ is a melt-processable fluorothermoplastic containing tetrafluoroethylene, hexafluoropropylene and vinylidene fluoride. Is suitable for processing by extrusion... view more

3M™ Dyneon™ Fluoroplastic THV 610GZ is a melt-processable fluorothermoplastic containing tetrafluoroethylene, hexafluoropropylene and vinylidene fluoride. Is suitable for processing by extrusion and... view more

3M™ Dyneon™ Fluoroplastic THV 815GZ is a melt-processable fluorothermoplastic containing fluorinated monomers. Is suitable for processing by extrusion. Processing profile allows co-processing with... view more

DOW™ LLDPE DNDA-7340 NT 7 is a linear low density polyethylene (LLDPE) grade. Exhibits high melt strength, excellent low temperature toughness, outstanding environmental stress crack resistance... view more

FLEXOMER™ DFDA-1137 NT 7 is a high molecular weight, relatively narrow molecular weight distributed ethylene very low density polyethylene (VLDPE) copolymer. Contains processing aid additive... view more

NORDEL™ IP 4760P by Dow is a medium molecular weight distribution ethylene propylene diene monomer (EPDM) grade. It has a mass of 67 percent ethylene, 4.9 percent 5-ethylidenenorbornene (ENB), and... view more

NORDEL™ IP 4770P by Dow Chemical is an ethylene propylene diene monomer (EPDM) grade with medium molecular weight distribution. Contains 70% of mass ethylene, 4.9% of mass 5-ethylidenenorbornene... view more

VESTAMID® L2123 by Evonik is a high viscosity, electrically isolating, semi-crystalline, unfilled, plasticized, polyamide 12 compound. It is processed by injection molding and profile & tube... view more

VESTAMID® LX9008 black 9.7504 by Evonik is an unfilled, electrically isolating, heat stabilized, high viscosity, plasticizer-free, polyamide 12 compound. It possesses extraordinary long-term heat... view more

VESTAMID® LX9013 black 9.7507 by Evonik is a high viscosity, electrically isolating, unfilled, plasticized, heat stabilized, polyamide 12 compound with extraordinary long-term heat resistance under... view more

Vistalon™ 5601 by ExxonMobil Chemical is ethylene propylene diene monomer (EPDM) terpolymer ruber produced using EXXPOL™ Technology for precise control of molecular composition and architecture... view more

KOPA® KN187 by Kolon ENP is a high viscosity, light weight polyamide (PA 6) grade. Imparts fast molding cycle, self-lubrication, flexibility and recyclability. Possesses good mechanical & impact... view more

ISPLEN® PG340AT by Repsol is a heat stabilized, scratch resistant polypropylene homopolymer reinforced with 30% chemically coupled glass fiber. Possesses very high- stiffness, rigidity, good impact... view more

ISPLEN PG370 AS is a scratch resistant polypropylene homopolymer reinforced with 30% chemically coupled glass fiber. Possesses very high stiffness, good impact strength, low- warpage and shrinkage... view more

ISPLEN® PG370AT by Repsol is a heat and UV stabilized, scratch resistant polypropylene homopolymer reinforced with 30% glass fiber. It possesses low- warpage, rigidity, shrinkage behavior, hinge... view more