ULTEM™ resin 1010R by SABIC is an unreinforced, amorphous, metallizable, general-purpose, flame-retardant polyetherimide (PEI) with improved flow. It shows radiation- (gamma, x-ray), UV-C, chemical... view more

ULTEM™ resin 1010TC by SABIC is an inherently flame retardant, general purpose, amorphous, high heat resistant, unreinforced polyetherimide (PEI) resin. It offers improved flow, very good chemical... view more

ULTEM™ resin 1100F (Americas) by SABIC is a standard flow, unreinforced polyetherimide (PEI) resin. It exhibits high heat resistance. Suitable for processing by injection molding. ULTEM™ resin 1100F... view more

ULTEM™ resin 1100F (Asia) by SABIC is a high heat resistant, standard flow, unreinforced polyetherimide (PEI) resin. It is suitable for processing by injection molding. Recommended for specialty... view more

ULTEM™ resin 1100F (Europe) by SABIC is a standard flow, unreinforced polyetherimide (PEI) resin. It offers high heat resistance. It is designed for specialty vehicles and mass transportation... view more

ULTEM™ resin 1110F (Americas) by SABIC is an amorphous, flame retardant, general purpose, unreinforced polyetherimide (PEI) resin. It exhibits easy & enhanced flow, low creep sensitivity, low... view more

ULTEM™ resin 1110F (Asia) by SABIC is an amorphous, flame retardant, general purpose, unreinforced polyetherimide (PEI) resin. It exhibits easy & enhanced flow, low creep sensitivity, low shrinkage... view more

ULTEM™ resin 1110F (Europe) by SABIC is an unreinforced polyetherimide (PEI) resin with easy & enhanced flow, low creep sensitivity, low shrinkage and good metal adhesion. Suitable for processing by... view more

ULTEM™ resin 2100F (Europe) by SABIC is an amorphous, general purpose, flame retardant, standard flow polyetherimide (PEI) resin, reinforced with 10% glass fiber. It offers good mechanicals in broad... view more

ULTEM™ resin 9011 (Americas) by SABIC is an unreinforced, PFAS-free, transparent polyetherimide (PEI). It is suitable for processing by injection molding. It offers high flow and improves processability for fiber... view more

ULTEM™ resin 9011 (Asia) by SABIC is a transparent, PFAS-free, unreinforced polyetherimide (PEI) resin. It is suitable for processing by injection molding. It exhibits high flow and improves processability... view more

ULTEM™ resin HU1000E by SABIC is an unreinforced, PFAS-free, amorphous, transparent, high stiffness, standard flow polyetherimide (PEI) resin with high glass transition temperature (Tg) of 217°C. It... view more

ULTEM™ resin HU1010 by SABIC is an unreinforced, amorphous, high stiffness polyetherimide (PEI) resin that may offer a high glass transition temperature (Tg) of 217°C and improved flow. It offers... view more

ULTEM™ resin HU1100 (Americas) by SABIC is an unreinforced, amorphous, standard flow, high stiffness, flame-retarded polyetherimide with glass transition temperature of 217°C. It is steam-, gamma... view more

ULTEM™ resin HU1100 (Asia) by SABIC is an unreinforced, amorphous, flame-retarded, standard flow, high stiffness polyetherimide with glass transition temperature of 217°C. It provides hydrolytic... view more

ULTEM™ resin HU1100 (Europe) by SABIC is an unreinforced, amorphous, flame-retarded, standard flow, high stiffness polyetherimide with glass transition temperature of 217°C. It is steam-, gamma... view more

ULTEM™ resin HU1110 (Americas) by SABIC is an unreinforced, enhanced flow, high stiffness polyetherimide grade. It is biocompatible (ISO 10993 or USP Class VI) and healthcare management of change applies. It is... view more

ULTEM™ resin HU1110 (Asia) by SABIC is an unreinforced, enhanced flow, high stiffness polyetherimide grade. It offers good mechanical properties in broad temperature range. It exhibits low creep sensitivity... view more

ULTEM™ resin HU1110 (Europe) by SABIC is an unreinforced, high stiffness, enhanced flow polyetherimide grade. It exhibits low creep sensitivity, low shrinkage, good metal adhesion, high strength and high heat... view more

ULTEM™ resin LTX300A (Americas) by SABIC is an unreinforced, high-flow polyetherimide (PEI) blend with low toxicity, smoke and flame evolution. It is suitable for processing by injection molding... view more