The Universal Selection Source:
Plastics & Elastomers
Product News

BASF at K 2016: To Launch PPA Portfolio for Auto and E&E Components

Published on 2016-09-19. Author : SpecialChem

BASF is expanding its range of partially aromatic polyamides and launching a new polyphthalamide (PPA) portfolio [Ultramid® Advanced N] in the market.

Ultramid® Advanced N

Ultramid® Advanced N

Key features of the Ultramid® Advanced N portfolio:
  • Unreinforced compounds and compounds reinforced with short or long glass fibers as well as flame-retardant grades. 
  • Exceed the properties of conventional PPA: constant mechanics up to 100°C (glass transition temperature: 125°C).
  • Outstanding chemical resistance and low water absorption as well as low friction and wear.
  • Enables short cycle times and a wide processing window. 
  • Supplemented by detailed material characterization and the proven BASF application development capabilities. 

Greater Scope for Innovations

The new portfolio gives customers from different industries greater freedom for innovations in order to develop technically sophisticated end-consumer products. With Ultramid® Advanced N, customers are able to satisfy demands for miniaturization, functional integration and freedom of design. They are also able to comply with energy efficiency and safety parameters – factors that are crucial to market success. With the new BASF PPA these high standards for mechanics, chemical resistance and dimensional stability can be met across a wide temperature range.

Dr. Melanie Maas-Brunner, Senior Vice President, Performance Materials Europe, said:
“Ultramid® Advanced N is BASF’s response to the rising demands on plastics that are employed today under increasingly challenging operating conditions. Developing specialties such as Ultramid® Advanced N is in-line with our strategy to provide our customers with a broad range of solutions. We are committed to offer a broad PPA portfolio and will further launch high-performance plastics in the coming years.”

Wide Range of Uses in Many Industries

Using Ultramid® Advanced N allows customers to design lighter, smaller and stronger plastic components for challenging environments where other materials reach their limits. The special properties of the new BASF PPA can be combined to create unique product profiles. The material is able to solve application problems in a wide range of different uses:
  • Ultramid® Advanced N is suitable for small connectors and function-integrating housings in white goods, consumer electronics and mobile devices. 
  • It can be used in automotive components and structural parts near the engine and the gearbox in contact with hot, aggressive media and different fuels. 
  • Applications like gear wheels and other wear parts can be implemented, too. 
  • Ultramid® Advanced N possesses lead-free soldering properties that find application within the electronics and electrical industry, e.g. to assemble circuit boards using SMD (SMD: surface mounted device) technology. 

Abdullah Shaikh, Head of PPA Business, Performance Materials Europe, said:
“We will actively approach our customers to understand their specific requirements and offer them solutions based on BASF’s expertise in application development and product know-how. We are looking forward to providing more insight into our portfolio and discuss applications with our customers during the K fair in October 2016.”

Superior Mechanics, Outstanding Flame Retardance and more

Rigidity and strength of the new BASF polyphthalamide remain stable up to the high glass transition temperature of 125°C, with very low impact from external influences like changes in humidity. Compared to a corresponding PA66 grade (glass transition temperature: 60°C), Ultramid Advanced N has a broader application range and superior mechanics. The electrical properties of Ultramid® Advanced N are also largely independent of moisture content at room temperature and above – a marked difference compared to aliphatic polyamides. As a result of its high melting point of 300°C and its low water uptake, Ultramid® Advanced N is particularly suitable for lead-free soldering: The heat distortion temperature is maintained and the material does not display any blistering. The low water uptake leads to an excellent dimensional stability. In tests, the water and moisture uptake could be reduced by 50% compared to a PA6T. An Ultramid® Advanced N grade reinforced with 35% glass fibers only absorbs less than 1% of moisture until saturation.

In alternating climate tests, the flame-retardant grade reinforced with 30% glass fibers proved to be superior to corresponding market PPA grades as far as its tendency to migrate is concerned. It has very good flame-retardant properties (V-0 rating in the UL94 tests at 0.4 mm) and is equipped with a flame retardant which is free of halogen. The material also displays excellent creep resistance, a good surface finish and is laser-markable.

Ultramid® Advanced N is extraordinarily resistant against chemicals, in particular hot oil, coolants such as Glysantin®, against calcium chloride as well as fuels with high methanol content. The individual grades are fitted with different heat stabilizers and thus tailor-made for particular requirements of the automotive, electrical and electronics industries.

BASF at K 2016

Where your ideas become ideal solutions: BASF at K fair from October 19-26, 2016 in Dusseldorf, Germany, in hall 5, booth C21/D21.

About BASF’s Performance Materials Division

BASF’s Performance Materials division encompasses the entire materials’ know-how of BASF regarding innovative, customized plastics under one roof. Globally active in four major industry sectors - transportation, construction, industrial applications and consumer goods – the division has a strong portfolio of products and services combined with a deep understanding of application-oriented system solutions. Key drivers of profitability and growth are our close collaboration with customers and a clear focus on solutions. Strong capabilities in R&D provide the basis to develop innovative products and applications.

About BASF

BASF creates chemistry for a sustainable future. It combines economic success with environmental protection and social responsibility. The approximately 112,000 employees in the BASF Group work on contributing to the success of our customers in nearly all sectors and almost every country in the world. Its portfolio is organized into five segments: Chemicals, Performance Products, Functional Materials & Solutions, Agricultural Solutions and Oil & Gas. BASF generated sales of more than €70 billion in 2015. BASF shares are traded on the stock exchanges in Frankfurt (BAS), London (BFA) and Zurich (AN).

PS: If you liked this News, you might enjoy our Plastics & Elastomers Product Newsletter. All the Product News delivered once a week right to your inbox. Sign up here!

Source: BASF
ForTii Ace
The Chemicals Sales & Marketing Toolbox
Back to Top